LOG IN
X
Yongnuo YN730 is a universal, manual reporter lamp powered by a dedicated 2000mAh battery. The device operates in two flash trigger modes: M (manual) and Multi (stroboscopic). The lamp has a built-in wireless communication module based on the RF603/560TX system. The Yongnuo YN730 comes with a standard center pin hot shoe.
Yongnuo YN730 is a universal, manual reporter lamp powered by a dedicated 2000mAh battery. The device operates in two flash trigger modes: M (manual) and Multi (stroboscopic). The lamp has a built-in wireless communication module based on the RF603/560TX system. The Yongnuo YN730 comes with a standard center pin hot shoe.
Yongnuo YN730 is structurally similar to all known models from this manufacturer. The movable head with the burner rotates horizontally in the range of 0° to 180°, and vertically -7° to 90°. The body is equipped with a clear control panel with large buttons and a setting knob, as well as a large LCD screen. The device has a USB-C port dedicated to software updates and a socket for a dedicated LB-E1 battery. On the bottom, the Yongnuo YN730 is equipped with a standard hot shoe with a central pin that fits most cameras and systems.
Yongnuo YN730 is a manual flash with the ability to adjust the flash in the range of 1/128 to 1/1 power level. The guide number for ISO 100 and 200 mm flash zoom is GN60. The flash charging time to full power is approximately 1 second. In addition to working in manual mode, the lamp allows you to trigger a stroboscopic flash.
Communication with triggers and lamps is enabled by a built-in 2.4 GHz transmitter operating in the RF603/560TX mode. The lamp offers operation in Master and Slave mode with a range of 16 channels. The radio operating range without interference is up to 100 meters. In addition to working in radio mode, the lamp can be triggered using a photocell in two modes - with or without skipping measurement pre-flashes.
The device is powered by a dedicated Li-ion LB-E1 battery with a capacity of 2000mAh, the efficiency of which is estimated at 600 flashes at full power. To charge the battery, use the included USB/USB-C cable, which should be connected directly to the battery body.
The lamp is sold in a box with a cover and a base with a 1/4" socket.
Attention. This product will not work with cameras without a central pin in the hot shoe slot (eg Canon EOS 2000D, 3000D, 4000D).
Guide Number | 60 |
Flash duration time | 1/200s - 1/20000s |
Recharge time | do 1s |
Power adjusting | 1/1- 1/128 co 1/3EV |
Colour temperature | ~5600K |
Work modes | M, MULTI |
Head adjusting | 0° do 180° |
Dimmensions | 64x78x210mm |
Weight | 417g |
Power supply | dedykowany akumulator LB-E1 Li-ion 2000mAh |
HSS Sync / AutoFP | NIE |
Synchronizacja na pierwszą kurtynę | TAK |
Synchronizacja na drugą kurtynę | TAK |
PC Socket | NIE |
Radio receiver - built in | TAK - YN560 (RF603, RF605, 560TX) |
Radio channels number | 16 |
Komunikacja optyczna - fotocela | S1, S2 |
Master Mode | TAK - YN560 (RF603, RF605, 560TX) |
Slave Mode | TAK - YN560 (RF603, RF605, 560TX) |
Working in groups | TAK |
Group's number | 6 |
Remote control | TAK |
Zoom palnika | 20-200mm |
Lighting modes | Manualny |
Regulacja głowicy pionowa | -7° do 90° |
LED lighting | NIE |
External power socket | NIE |
USB port - for firmware update | TAK - USB-C |
Overheat protection | TAK |
Choose matching accessories and pay once for shipping!